The Hillman Group 370830 Hex Head Sleeve Anchor 1 2 X 3 Inch 12 Pack

9.6
More Info

The Hillman Group 370830 Hex Head Sleeve Anchor is the perfect solution to secure your fixtures into various base materials. These expansion type anchors are incredibly versatile and ideal for use wit...

CONFAST 1 4 x 1 1 4 Hammer Drive Nail in Anchor 100 per Box

9.6
More Info

The CONFAST 1/4" x 1-1/4" Hammer Drive Nail in Anchor is an essential tool for those who are looking for a reliable and permanent fastening solution. This anchor is made from ZAMAC and can be used in ...

CONFAST LDC383 3 8 x 3 Zinc Plated Large Diameter Concrete Screw for Anchoring to Masonry Brick or...

9.2
More Info

If you need a reliable and sturdy anchor for your concrete project, then the CONFAST LDC383 3 8 x 3 Zinc Plated Large Diameter Concrete Screw might just be what you're looking for. Designed for anchor...ing to masonry, brick, or block, this anchor is made of carbon steel and is zinc plated, ensuring that it's both strong and resistant to corrosion. This concrete screw boasts of several features that set it apart from other anchors in the market. For one, it has the ability to cut its own thread into concrete when inserted into a properly drilled hole. This means that you don't need to pre-tap or use an anchor with pre-threaded holes, making installation faster and easier. The anchor's threads are also designed for low torque, which makes for easy installation. No need for any special tools or skills to get the anchor installed securely. Speaking of secure, the CONFAST LDC383 comes with a serrated hex washer head that's designed to prevent back-out. This is especially important when you're attaching heavy objects to concrete and don't want the anchor to loosen or slip out over time. Another great thing about this anchor is its single piece design, which means there's no assembly required. It's ready to install right out of the box, saving you time and effort. In terms of drilling and bit requirements, the CONFAST LDC383 requires a 3/8" hole to be drilled in the base material using a carbide-tipped bit and a hammer drill. For driving the anchor into the base material, you'll need a 9/16" nut driver. The anchor itself has a diameter of 3/8" and a length of 3". It requires a minimum embedment into the concrete of 1-1/2" and can only be used on materials with a maximum thickness of 1-1/2". You'll also need to make sure that the hole in the fixture or material being fastened is larger than the designated diameter of the anchor (7/16" for a 3/8" diameter anchor). Lastly, it's important to note that each anchor must be spaced a minimum distance of 6" from each other when measured center to center. Moreover, you should never install the anchor any closer than 3" from an unsupported edge of the concrete. Whether you're working on a DIY project or a professional construction job, the CONFAST LDC383 is a solid choice for anchoring to concrete. Its self-threading feature, low torque threads, serrated hex washer head, and single piece design make it a convenient and reliable option for your next project.

Anrik 1 4 inch x 2 1 4 inch 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

9.2
More Info

Anrik 1 4 inch x 2 1 4 inch 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete is a high quality and durable product that is designed for heavy duty fastening applications where high ...

Simpson Strong Tie STB2 50334 1 2 x 3 3 4 Zinc Strong Bolt2 Wedge Anchor 25ct

9.2
More Info

The Simpson Strong-Tie STB2 50334 1/2" x 3-3/4" Zinc Strong-Bolt 2 Wedge Anchor 25ct is a high-performance anchor designed for use in both cracked and uncracked concrete. It is a requirement of the 20...09 International Building Code (IBC) that post-installed anchors perform well under both conditions, making the Strong-Bolt anchor an ideal choice for any construction project. The Strong-Bolt 2 wedge anchor features a proprietary tri-segmented clip with dual undercutting embossments on each segment. This enables secondary or follow-up expansion if a crack forms and intersects the anchor location. The anchor has been tested to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading, making it an extremely strong and reliable product. This anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to the ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seismic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete, this anchor is a top pick for any construction project. The Simpson Strong-Tie STB2 50334 1/2" x 3-3/4" Zinc Strong-Bolt 2 Wedge Anchor 25ct includes 25 anchors in the pack. It is a cost-effective and practical solution for any project requiring strong and reliable anchors. The anchor is made of high-quality and durable zinc for long-lasting performance. It is easy to install and offers a secure and stable hold for any material that needs to be anchored. In conclusion, if you are looking for a reliable and high-performing wedge anchor for your construction project, the Simpson Strong-Tie STB2 50334 1/2" x 3-3/4" Zinc Strong-Bolt 2 Wedge Anchor 25ct is the perfect choice for you. With its excellent features, including its high-performance in both cracked and uncracked concrete, it is no wonder this product is a top pick for many contractors and builders. Invest in your project's success and security with this excellent product from Simpson Strong-Tie.

Red Head LDT 1240 Large Diameter Tapcon 1 2 Inch by 4 Inch Anchor 25 per Box

9.2
More Info

6. Install in Less Than Half the Time of Wedge or Adhesive Anchors 7. Easy Removal, No Torch or Grinding Required 8. Single Piece Design, No Nut and Washer to Assemble 9. More Threads for Better Th...read Engagement and Higher Pullout Resistance 10. Closer Edge/Spacing Distance and Higher Loads in Shallow Embedments The Red Head LDT 1240 Large Diameter Tapcon 1/2 Inch by 4 Inch Anchor is a top-of-the-line anchoring solution that is perfect for a wide variety of applications. It is a high-performance anchor that is designed to cut its own threads into concrete, ensuring a secure and reliable hold. The hardened carbon steel and zinc plated, Grade 11 construction of the anchor body ensures that it is extremely strong and durable, making it ideal for even the toughest jobs. The anchor features a finished hex washer head with anti-rotation serrations that prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection. This makes it easy to ensure that the anchor is installed correctly and securely. Additionally, the anchor is designed to be installed with carbide-tipped hammer drill bits made in accordance with ANSI B212.15-1994. This ensures that the anchor is installed correctly and reduces the likelihood of anchor failure due to incorrect bit usage. One of the key benefits of the Red Head LDT 1240 Large Diameter Tapcon Anchor is that it can be installed in less than half the time of wedge anchors or adhesive anchors. This means that you can get your job done faster and more efficiently than ever before. This is accomplished by simply drilling a pilot hole and then driving the LDT anchor by hand or impact. Additionally, the anchor removes easily, with no torching or grinding required, making it easy to remove and replace the anchor if necessary. The single-piece design of the Red Head LDT 1240 Large Diameter Tapcon Anchor means that there is no nut and washer to assemble, making installation even easier. The anchor also has more threads for better thread engagement and higher pullout resistance, making it even more secure and reliable. And with closer edge/spacing distance than mechanical anchors and higher loads in shallow embedments, this anchor is truly the best of the best. In short, if you are looking for a high-quality, reliable anchoring solution that is easy to install and remove, then the Red Head LDT 1240 Large Diameter Tapcon 1/2 Inch by 4 Inch Anchor is an excellent choice. It is strong, durable, and designed to provide a secure hold in even the most demanding applications. So if you want to get the job done right, choose the best – choose the Red Head LDT 1240 Large Diameter Tapcon Anchor.

Four 4 1 2 Inch Premium Zinc Plated Carbon Steel Knurled Drop in Anchor BCP1001

9
More Info

Looking for a durable and reliable anchor solution? Look no further than the Four 4 1/2-Inch Premium Zinc Plated Carbon Steel Knurled Drop-in Anchor BCP1001. This product is designed to offer maximum ...

CONFAST 1 4 Inside Screw 1 4 Diameter Single Expansion Anchor 100 per Box

7.8
More Info

The CONFAST 1/4 Inside Screw 1/4 Diameter Single Expansion Anchor is a versatile and reliable anchoring solution designed for use in concrete, block, and brick. Made from Zamac, this pre-assembled anc...

Double Expansion Anchors for Masonry Concrete Brick or Block Zamac Zinc 1 4 20 x 1 1 4 Qty 10

7.6
More Info

If you're looking for a reliable and versatile anchoring solution for your masonry projects, you might want to consider the Double Expansion Anchors for Masonry Concrete Brick or Block Zamac Zinc 1 4 ...20 x 1 1 4 Qty 10. These anchors are made of Zamac Zinc alloy, which is a popular choice for concrete anchoring due to its high corrosion resistance and durability. Here are some of the features of these anchors that make them a great option for various applications: 1. Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts These anchors are designed to work with machine screws or bolts, which allows you to choose the right fastener for your specific needs. You can use them with different types of screws or bolts, such as hex head, round head, or pan head, depending on the material you're anchoring and the level of security you require. The Zamac Zinc material also ensures that the anchors will not rust or corrode over time. 2. Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit The Double Expansion Anchors for Masonry have a unique four-part design that provides superior holding power and stability. The anchor consists of a two-piece tubular shield that expands inside the hole when the wedge-shaped cone is driven into it. The cone is hollow, which allows it to compress and distribute the load evenly over the shield's surface area. Finally, the wedge-shaped nut is tightened to secure the anchor in place, ensuring a sturdy and long-lasting grip. 3. Used in soft masonry with machine screws or machine bolts These anchors are specially designed for soft masonry materials such as concrete, block, or brick. They can be used with machine screws or bolts to provide a strong and reliable hold. They are ideal for installations where drilling into the material is impossible, such as hollow concrete blocks or thin brick walls. 4. Can also be used in harder materials, including stone, brick, concrete or block While these anchors shine in softer masonry materials, they are also suitable for harder materials such as stone, brick, concrete, or block. Their four-part design allows them to distribute the load evenly, making them more effective than other types of anchors that rely on friction or expansion alone. This versatility makes them an excellent choice for various applications, from installing cabinets and shelves to securing heavy equipment or machinery. 5. UNC Coarse Threads The Double Expansion Anchors for Masonry feature UNC coarse threads. This means that they have a larger thread pitch than standard screws or bolts, allowing them to engage more deeply and securely into the material. The coarse threads also help to prevent stripping or cross-threading, ensuring that the anchors can be tightened smoothly and securely. In conclusion, if you need a sturdy and reliable anchoring solution for your masonry projects, the Double Expansion Anchors for Masonry Concrete Brick or Block Zamac Zinc 1 4 20 x 1 1 4 Qty 10 might be just what you need. Their four-part design, Zamac Zinc material, and coarse threads make them a versatile and effective option for various applications. With these anchors, you can rest assured that your installations will be stable and secure for years to come.

Best Tapcon Concrete Screws
of Dec 2024

Related Topics You Might Like

Our Mission

Top Interested

About

Best Tapcon Concrete Screws of Dec 2024

Related Topics You Might Like

Our Mission

Top Interested

About

Best Tapcon Concrete Screws
of Dec 2024