⋅ CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features 1/2-gallon ABS plastic tank, and 6-foot power cord; 1/50 HP delivers up to 65 GPH
⋅ AUTOMATIC HVAC PUMP: Idea...
⋅ AUTOMATIC HVAC PUMP: Idea...
The Little Giant VCMX-20ULST 115 Volt, 1/30 HP, 84 GPH Automatic Condensate Removal Pump is the perfect solution for removing condensate from air conditioners, refrigerators, dehumidifiers, high-effic...
5. Maximum Lift: 22'
6. Voltage: 120 Volts
7. Quick Connect Terminals: 1/4"
8. Indicator Lights: Red, Yellow, and Green
9. Float: Foamed Polyethylene
10. Inlet Holes: 4
11. Rubber Feet: Yes
1...
8. EASY INSTALLATION: includes removable 3/8-inch barbed check valve and 6-foot power cord
The Little Giant VCMA-20ULS 115 Volt, 1/30 HP Automatic Condensate Removal Pump with Safety Switch is desi...
6. VIBRATION DAMPENING FEET AND MOTOR MOUNTS: Reduces noise and vibration for a quieter operation 7. PAN PILL DISPENSER: Allows for a quick and easy installation of a pan pill for a more efficient removal of condensate
The Model 554914 Little Giant VCMA-15ULS Condensate Pump is the perfect choice for removing condensation from high-efficiency gas furnaces and air conditioning units. It is also ideal for disposing of...
The DIAL 1387 UL15000 Cooler Pump is the perfect solution for industrial cooling needs. This UL15000 evaporative cooler pump is a 115V UL classified product that comes with an auto reset thermal overl...
The Little Giant VCMA-15ULS 115 Volt, 65 GPH, 1/50 HP Automatic Condensate Removal Pump with Safety Switch is the perfect solution for removing condensate from HVAC equipment such as air conditioners,...
The Little Giant VCL-24ULS (553201) is a powerful 115-volt 1/18 HP, 270 GPH automatic condensate removal pump designed to remove condensate from air conditioning, refrigeration, and dehmidification eq...
Aquastrong 1/38HP 85 GPH HAVC Condensate Pump, 115V/230V, Automatic Safety Switch, AC Condensate Removal...
The Aquastrong 1/38HP 85 GPH HAVC Condensate Pump is the perfect solution for removing condensate from air conditioners, furnaces, and dehumidifiers. Featuring an efficient thermally protected motor, ...
4. Flame Retardant motor housing
5. Auto reset thermal overload
6. UL classified
7. 115V, 11,000 cfm, concentric pump
8. 420 gph low level pump
9. Fits mounting bracket in champion coolers
10. G...
high, 1/50 HP, 115V, thermally protected, with removable check valve"
The Diversitech CP-22 Condensate Removal Pump (Pack of 2) is an ideal solution for removing condensate from air conditioners, fur...
FPOWER 1/5HP Submersible Utility Pump High Flow 1500GPH for Quickly Water Removal Household Drainage...
The FPOWER 1/5HP Submersible Utility Pump is the perfect choice for quickly removing water from your home. This powerful pump has a PSC motor that produces 1/5 HP of output power and can lift water up...
6. INCLUDES: Includes 45 degree discharge adapter, 90 degree elbow with bleed off port, 6-ft. cord with 3-prong plug
The Little Giant CP1-115 1/70 HP, 115/127 Volt, 307 GPH, Evaporative Cooler Pump...
Star COND1 1/6 HP Automatic Condensate Removal Pump with Safety Switch (Low Profile) Multi
The Star COND1 1/6 HP Automatic Condensate Removal Pump with Safety Switch (Low Profile) Multi-Purpose for HVAC, Dehumidifier, and Air Conditioner is the perfect solution for your condensate water rem...
The Diversitech Corporation IQP-120 Condensate Pump is a high-quality product from Diversitech, North America's largest manufacturer of equipment pads and a leading supplier of components to the HVACR...
6. Easy installation
7. Low power consumption
The Sauermann SI 33 Mini Condensate Removal Pump for Air Conditioners is designed to provide efficient and reliable performance in any kind of environ...
The Little Giant 1-ABS 115-Volt, 1/150 HP, 205 GPH Shallow Pan Condensate Removal Pump is the perfect solution for removing condensate from air conditioners or dehumidifiers. This pump fits inside mos...
When it comes to dealing with moisture in HVAC systems, condensation pumps are indispensable. However, with so many products available in the market, it can be challenging to choose the right one for your needs. In this article, we will share valuable tips on how to choose the best condensation pump for your material handling needs.
Tip 1: Consider the Pump's Flow Rate
Condensation pumps come in different sizes, and one of the most critical factors to consider is the flow rate. The flow rate refers to the rate at which the pump is capable of removing water from the system. If you have a large HVAC system, you will need a pump with a high flow rate, while a smaller system may require a lower flow rate pump. When selecting a condensation pump, make sure that the pump's flow rate can handle the moisture load in your system. The pump's flow rate is typically measured in gallons per hour (GPH) or liters per hour (LPH). So, make sure to look for this specification when comparing different condensation pump products.Tip 2: Look for a Pump with a High Lift Capacity
The lift capacity of a condensation pump refers to the height the pump can lift water before discharging it into a drain or other system. The lift capacity of a pump must be considered along with the flow rate, as it affects how well the pump can handle and remove moisture from the system. If the pump is unable to lift water high enough, it will not be able to deliver the required flow rate. It is, therefore, important to choose a pump with a high lift capacity, especially if your system has long vertical run distances. The lift capacity of a pump is typically measured in feet or meters.Tip 3: Choose a Pump with Automatic Shut-Off Feature
A high-quality condensation pump should have an automatic shut-off feature to prevent overflow and flooding. This feature detects when the water level in the reservoir has reached a certain level and shuts off the pump to prevent overflow. This feature is especially important when the pump is used in a busy commercial or industrial setting. Without an automatic shut-off feature, the pump will continue to run even when the reservoir is full, leading to overflow and flooding. This can cause significant damage to your HVAC system and surrounding equipment, leading to costly repairs and potential downtime.Tip 4: Look for a Pump with a Durable Housing
The pump's housing is an essential factor to consider when purchasing a condensation pump. The housing should be made of durable materials that can withstand the harsh conditions of operating in a moist environment. Some common materials used for pump housings include stainless steel, cast iron, and ABS plastic. The housing should also be resistant to corrosion, rust, and other forms of damage caused by moisture. The pump's housing should have a watertight seal to prevent moisture from entering the electrical components of the pump.Tip 5: Check the Noise Level of the Pump
Condensation pumps can be noisy, especially when they are operating in a residential or office setting. The pump's noise level is an essential factor to consider, as it can affect the comfort levels of the people working or living near the pump. When selecting a pump, look for products that come with noise-reducing features such as rubber mounts and insulated housing. You can also ask the manufacturer for the product's noise level specifications to ensure that the pump operates quietly.Tip 6: Consider the Size of the Pump
The size of the pump is another essential factor to consider when purchasing a condensation pump. The pump's size must be proportional to the size of the system it is serving. An oversized pump may lead to frequent on/off cycling, leading to premature wear and tear, while an undersized pump may not be able to handle the moisture load in the system. When selecting a pump, make sure to choose a size that can handle the moisture load in your system without overworking or underworking the pump.Tip 7: Look for Additional Features
Some condensation pumps come with additional features that can add value to your investment. These features may include a built-in check valve, an anti-vibration pad, and a battery backup system. The built-in check valve prevents backflow, while the anti-vibration pad reduces the pump's noise level and prevents damage caused by vibrations. The battery backup system is especially useful in areas with frequent power outages. It ensures that the pump continues to operate even in the absence of electricity, preventing flooding and damage to the HVAC system.Conclusion
In summary, when selecting a condensation pump for material handling, it is important to consider the flow rate, lift capacity, automatic shut-off feature, housing durability, noise level, product size, and additional features. By evaluating these factors, you can choose a reliable and effective condensation pump that will meet your needs and provide value for your investment.Related Topics You Might Like
